Altair India

HYPERWORKS FOR STUDENTS

Papers presented at Altair India's User's Conferences

Click on a title to read the paper online. To save it to your computer, right-click on the [PDF] tag and select save-as.

1. Automation of Material Flow in Extrusion Dies through Simulation
2. Blade Root Shape Optimization
3. Complete Optimization of Mounting Structure of Communication Payload System using OptiStruct and Customized Cad Tools
4. Computational Methods in Brake System Design
5. Crankcase Noise Reduction of an IC Engine
6. Design and Structural Optimization of Airborne Remote Sensing Antenna
7. Design Improvements on a Hydraulic Filter in an Aircraft using Topology and Shape Optimization
8. Design of Complex Steam Turbine Low Pressure Casing
9. Design Optimization using HyperStudy, LS-Dyna and GDOT
10. Failure Investigation of Discharge Silencer
11. Finite Element Analysis for Crankshaft Optimization
12. Inclusion of Forming Effect in Crash Simulations using One-Step Forming Simulation
13. Lay-up Optimization of Composites Hull Component
14. Mesh Generation for Metal Flow Simulation
15. Optimization for Drop Testing, using HyperStudy, Abaqus and PBS/Pro
16. Optimization of BIW, Chassis and Casting
17. Optimization of Gear Shifter Fork
18. Optimization of HLA Pump/Motor Housing
19. Optimization of Tire Performance using Predictive Analysis Tools
20. Blade Root Shape Optimization
21. Optimum Design of a Composite Base Structure of a Spacecraft
22. Process Automation applied to Chassis Stiffness
23. Process Automation for Brake Drum Analysis
24. Process Automation for Chassis Design.
25. Process Automation for Safety - Model Setup for Crash Simulation using HyperWorks and LS-Dyna.
26. Process Automation: Calculation of Safety Belts Anchorage Zone and Crash Simulation as per ECE-R14 and R16.
27. Product Development Time and Cost Reduction through CAE Process Automation.
28. Rapid Design Techniques for Automotive Bumper Energy Absorbers using Morphing.
29. Redesign and Optimization of Lift Plate Based on Glass Installation Load.
30. Redesign of Crank Case with Alternate material for a Hermitic Compressor.
31. Shape Optimization of Front Axle Beam.
32. Shape Optimization using OptiStruct.
33. Spatial Optimization of Engineered Polymeric Multi-wall Sheets.
34. Topology and Topography Optimization for Design of Engine FEAD Brackets and Covers.
35. Topology Optimization for Beading Pattern Development.
36. Topology Optimization of a Secondary Spring Bracket.
37. Topology Optimization of Special Purpose Broaching Machine Frame.
38. Topology Optimization of Track Rod Lever.
39. Uncertainty Quantification based Design Optimization using HyperStudy, LS-Dyna and Relia GDOT.
40. Underbody Simulation for Vehicle Thermal Management.
41. Weight Optimization of Instrument Panel System.